First Completed Scion

Astra Militarum Tempestus Scion Showcase

     I've completed my first Tempestus Sci... BAH nevermind that silly name... STORM TROOPER! HAH! Yes I've completed my first Storm Trooper from the new kit.  I'm not planning on cranking this squad out just now, as I've got bigger fish to fry.  I really wanted to completely assemble and paint one of these new models, however, so I could learn a bit more and give you guys a more detailed review of the model.

Assembly

     This kit, more than any other infantry kit from Games Workshop, demands that you follow the instructions.  On my previous post concerning this kit, I mentioned the instruction booklet (which it actually is, not a single sheet but an actual little booklet) and how impressed I was with it.  After completing the first model, I now know that the amount of detail they put in there was absolutely required.  The power cords coming off most of the weapons require that you match them to certain arms and backpacks.  Test fitting your model before you start gluing is mandatory too.  The backpack's power cord needs to meet up with the weapon's power cord and that determines the angle of the arms.  I would recommend plastic glue for assembly over super glue.  As long as you check and double check the fit of everything prior to gluing, you'll be fine.


Painting

     Games Workshop released a two part video tutorial on their YouTube channel (you can find part one here).  I want to first point out that this recent trend of them releasing these tutorials to coincide with their recent releases is actually really smart.  The videos are easy to follow, and well produced.  Even a 6 year veteran to the hobby can still learn some things from these.  I decided to follow their basic path to completion, but I altered colors to match with my existing guard.

Here are my other Imperial Guard Infantry... sorry... Astra Militarum *sigh*

     I tend to fully assemble infantry models before painting as I figure that if it's difficult to get my brush there in order to paint something, it's generally difficult to see that area.  That said, if I were looking to paint this figure up to a competition standard, I would have left the weapon off to better paint the chest armor.  There are some very fiddly details on these models so I also recommend just base coating pretty much everything first, then coming back to clean up prior to applying washes.  This should be pretty standard practice, but with all these fine details (like the metal trimming all over the armor) you want to make sure your base coats are nice and clean, carefully going over all the edges where two colors meet.

     One thing that stood out as I neared the end of painting on this model: no decals.  I wasn't a fan of transfers when I started in the hobby, but after becoming more familiar with all the tips and tricks in applying them, making them blend into the model, and weathering them, I've come to quite enjoy them.  My guard veteran squads all have transfers, each with a meaning as to the organization of my particular regiment.  I like these little visual story bits.  The new Storm Trooper kit does not have a transfer sheet at all, which isn't a surprise because there isn't any actual real estate on which you could apply them.  I decided that I would copy the GW style of paint job on their box-art Temestus Scions and have an arm stripe, but instead of a brighter shade of blue, I would incorporate white, as that can be seen as a common color across my existing guard.  This decision turned out to be a wise one.  Once I added this stripe, the figure seemed to be complete.  If you are planning on following your own custom theme for your Scions, and perhaps you were on the fence about the arm stripe, I am here to say that it's a good idea.  Here are some pictures followed by a few last words.  Enjoy:

Conclusion

     I like these models, but I actually like them a slight bit less than I did on first impression.  These models are perhaps too detailed.  With hardly any larger open surface areas, I found it difficult to express the same amount of freehand blending and weathering.  Weathering seemed to busy up the model a bit too much given the existing level of physical detail.  I'm going to try more edge weathering on subsequent Scion models.  I still like the models, just not quite as head-over-heels as I was when I saw those first leaked pictures.

Base

     The base used for this model can be purchased from the fine folks over at Secret Weapons Miniatures.  This is from their "Urban Streets" bevel edged resin bases line found here.  I like the fine detail that Secret Weapons Miniatures has on their bases, but I have a few points of contention with this set.  The first complaint is that they are a bit "tall" which resulted in this Storm Trooper being about a head taller than my other guard on standard bases. The second complaint is that the beveled edge was rather rough and required a good bit of clean-up.  Both of these complaints certainly aren't deal-breakers, and I will most certainly continue to use them for my Tempestus Scion squads.

Ork Blitza-Bommer All Done

Here's the Finished Product!

     I completed the base this evening.  Unless I decide to add some flocking or grass tufts (which I'm likely to do).  The painting, at the very least, is totally complete.  I kept the base simple, but focused on some weathered accents in the abandoned oil drum, and rusted bucket.  I really enjoyed mucking up these two items, especially the barrel.

I Love Rust and Such

     I used some very simple techniques and the outcome was terrific.  Here's a quick step-by-step:

1.  I based coated the barrel with the old Knarloc Green which is now called Loren Forest (Citadel paint).  
2. Then applied the transfers like this: a gloss coat, put down the two transfers, applied micro-sol, let it dry, then applied matte coat to seal the transfers in.
3. Once the matte coat was dry, I took a sponge and some Knarloc Green (Loren Forest), and dabbed it over the transfers to "rough them up" a bit.
4. Applied a wash of Agrax Earthshade across the whole barrel.  I made sure to reapply to recesses that would have a larger collection of dirt, rust, and oil.
5. I then used the new technical paint Typhus Corrosion.  I applied it very heavily to the bottom of the barrel, and along the underside to show that it might have been slapped around in the mud just a bit when it was hurriedly left by the Imperials.  Typhus Corrosion leaves a grit, which would be vital to the next step.
6. I dabbed Vallejo Pigment (or weathering powder) Dark Red Ochre (sic) around the bottom of the barrel were the Typhon Corrosion was thickest.  Once applied fully, I took a clean brush loaded with white mineral spirits and carefully tapped over the powder.  The mineral spirits really flow of the brush and quickly run across the model.  I do this to "pull" the pigments onto the model.
7. Once the mineral spirits have dried (this is a pretty quick process) I now very carefully dabbed matte finish over the rusted areas, and then eventually brushed over the entire barrel.

Oil Spill

     Another really easy effect is the look of some leaked oil onto the mud.  It's a bit hard to see in the picture, but shows up well in person, but essentially all I did was apply a pool of black wash to the earth near the lid.  Once dried I then coated the same area with a gloss coat.  This looks like oil soaking into the ground, but still a little fresh.

Secret Weapons Miniatures Base Review

     This base from Secret Weapons Miniatures is quite nice.  Though it doesn't scream out with detailed features, it fits perfectly with the rest of the army.  I pictured my Orks on a dreary wasteland, harsh and unforgiving, but with plenty of space to speed about.  I liked the subtle tire tracks through the dirt, and the very simple rocks.  The most important feature for me was that there would still be space for me to attach my flight stand and most all of the Secret Weapons line of bases seem to be very reasonable in the amount of room you have to actually mount a model.  I have a number of other bases that I've purchased from them and all bases arrived nearly completely flash free and with a low amount of mold release on them.  This means they are quickly cleaned up and ready for models.  My one possible complaint would be that the edges sometimes need a bit of filing to get absolutely smooth.  This is really a very minor complaint and honestly if you're in this hobby you're probably more than willing to spend a few minutes filing or sanding to make sure everything is just so.

     A quick word on how I put the flight stand and base together: In order to attach the stand, I traced out the stand before I painted, and carefully carved out a very shallow smooth footprint for it to make solid contact with the base.  I then pinned it in as a final measure.  I'm still going to be awfully careful with this flight stand, as it certainly isn't the most aggressive way to attach it to a base.


Thanks for Stopping By!

     I appreciate everyone that comes by to view my work.  Any feedback is appreciated and I'll be happy to answer any questions.  I'll just leave you with some more pictures of my completed project, enjoy!

Finished Valkyrie with Secret Weapon Base!

It's Been a Long Time

     It has taken me a very (read: VERY!) long time to complete this model.  Rightfully so!  It's not an easy kit to assemble, even more difficult if you're constantly fretting over which bits should be painted before assembling.  This kit isn't for beginners, even the ones that don't intend to paint the model.

     This represents quite a few milestones for me.  This is the largest Warhammer 40K model I've ever assembled and painted.  This is also the first time that I've had a pre-made resin base.  I absolutely fell in love with Secret Weapon Minisatures' Urban Street bases (see previous post).  The base was so easy to paint that it almost felt like cheating.  Not cheating enough for me NOT to use it.

     I'll have some more pictures and a funny story about the Valkyrie in a bit, but first I want to talk about the base.

The Joy of Basing

     As I said above, this was a joy to paint.  I got to experiment with all sorts of techniques that I have been wanting to try.  I think the end results were pretty good and I learned a bit about different methods of applications of weathering powders.

     Before I could paint it, I needed to make sure that I could fix the flight stand such that it would sit flat on the base.  The elevated portion of the base, containing the side walk, was the challenge.  I decided that I would try a bit of carving.  I went to a hobby store and purchased a cheap wood working kit that had a few carving tools.  I looked for one that had the width of one of the "fins" of the flight stand (the typical GW one) and lucked out with one that was just slightly larger.  I then traced out the footprint of the flight stand on the bare resin base with a pencil.  I then started carving into my perfectly nice base.  You can clearly see the carved out portion here:

     Took some guts to do this to this beautiful base

     Once I was sure I was getting close to a good fit, I just kept test fitting and shaving off smaller amounts each time.  At the end, the flight stand fit perfectly!  Here is a close look at the result:

     Since the "fin" that I had carved out that little trench for was sunken ever so slightly into the base, I was sure to use a more daring amount of glue on that portion of the stand.  It seems like I have a good strong fix between the stand and the base, but I'll likely always treat it a bit gingerly just in they desire to divorce themselves of each other.

The Gunners: Frick and Frack

     The final piece I had to complete on this model was the door gunners.  I had spent a fair bit of time making sure the cabin was detailed, and I had made sure to magnetize the gun cradles to the swing arms such that I could be truly WYSIWYG if I should opt NOT to take the two Heavy Bolter door guns.  With all that work in place, I knew that I wanted to put some real detail into the door gunners themselves.  Obviously I wouldn't spend as much time as I had on some of my infantry models, such as my command squad, but I wanted them to still stand up to some scrutiny.  So here they are:

Frick on the left, Frack on the right

     I made sure that they matched the infantry but yet looked a little bit different such that they represented flight crew, not ground slogging infantry.  Their armor is fresher looking, no bullet holes or rusting.  They have flight suits so no camo spots either.  I spent a bit of time making sure those visors on their helmets had some very subtle light streaks and spots.  After all that, here's what you see of them when they're installed:

Detail work?  Totally worth it.  Just look at that visor!

     Yes, I do feel like a bit of an idiot.  I'm a slow painter because I'm still not super great at NOT painting bits of the model in less detail.  That's truly a talent in and of itself.  Dave Taylor, ex-GW man and the absolute master of the fast army, is my hero because of that ability alone.  I've see his work on his blog and everything is simple and elegant.  While he's capable of finely detailed paint jobs, he doesn't do it unless he has to for the most part.  He knows how to spend the effort on the parts of the model that the eye naturally clings to.  Maybe I'll be able to do that some day.  Oh and if you think the above photo is bad, wait until you see it with the wing attached!

What door gunner?

Summary

     I really feel that this was a pretty good milestone for me.  I'm proud of the model, but I'm also immensely pleased to have it OFF my painting table and in my display cabinet.  I've got another Valkyrie kit sitting here, but that will have to wait.  I have an Ork flyer to paint!

     I was worried that this paint scheme wouldn't fit in with my army.  I wanted the Valkyries to stand apart because they are flyers, and I reasoned that they shouldn't have the same camo pattern as my tanks.  To that end, I went with a bit of a "stealthier" look since these things will be shuttling two Storm Trooper squads around.  Just to make sure that it would still fit, I added those stripes.  I think that did the trick.  Here are some pictures with a few of my infantry to compare:

     I had some fun staging those two pictures.  Some day, when I have a table and some terrain, I could see myself wasting some time setting up some scenes with my models.  Full man-child achievement unlocked!

     I have a game lined up for tomorrow.  I think I'll be taking my Guard along for shits and giggles.  Might as well start to learn how to use them a bit.  Additionally I've been dying to mess about with a flyer so this gives me the perfect excuse.

     I leave you with a few more pictures of the Valkyrie:

Secret Weapon Miniatures Resin Bases First Impressions

I'll gladly pay someone to do this for me

     I'm not a fan of making bases myself.  I've done it, and I might even dare say that I've done it well in a few cases.  Nothing fancy, nothing amazing, but clean and simple bases for models I intend to use quite often.  When I started working on my Imperial Guard, I wanted to really try on some of those bases.  I really did put some extra effort, but still with an eye to the fact that these models were intended to be played on a table, not sat on a plinth for display.  After I finished 25 infantry models, I made an executive decision: I'll gladly pay someone to make something a bit fancier than what I'm capable of doing.

     Enter Secret Weapon Miniatures!

     The concept with my Imperial Guard, when I started, was that I would have the Veterans/Regulars have a mix of dirt and urban rubble.  Some cement blocks but some brown earth and some flock.  I then wanted the more elite portion of my army to be the real urban warfare types.  To this end I would have two Storm Trooper squads and two Valkyries with urban streets and rubble as their bases.  I found exactly what I was looking for on Secret Weapon's site.  Here they are!

     I also recently purchased an Ork flyer kit.  My Orks have a very simple base theme.  Muddy dirt.  Lots of rich browns to be properly Orky.  It would compliment the orange color that I had picked as my war band's primary color.  Looking around Secret Weapon's site again, I found this!  Painted to match, that "desert wasteland" could easily fit into my mudpocalypse theme.

Got it, opened it, and here's what I think

     The bases arrived by mail, and I was all too happy to tear into the envelope.  I should mention now that this is the first time I've ever purchased resin bases, so there was a lot of impressions to be had here.  The bases are incredible.  While the large oval bases clearly steal the show, even the small infantry bases have loads of details and importantly lots of space onto which I can place the model.  There's only a tiny bit of flashing around the edges of the bases that can either be filed off or even just scraped off with a blade.

Large Ovals

     I was worried about the sizing of the large oval bases.  The Urban Streets variety said on the site that it was 90x120mm but the Desert Wasteland one said 95x120mm.  Well I'm happy to report that they are in fact the same size and also the same size as the Games Workshop large oval base.

Same size! 

     I will have to do a slight bit of carving to get the flight stand on that Urban Streets base.  Not too much, though and I'll have to be delicate about it.  I'm thinking about getting an actual carving tool to make sure I do it as cleanly as possible.  The Desert Wasteland might need a very slight amount as well.

Infantry Bases

     The small bases are perfect.  I'll need no sort of tweaking to make a model fit, which is great.  There are a decent amount of variation, though I'm sure I'll enhance that through added bits to the base, be it flocking or painting.  I still want my Storm Troopers to look really unique, and I haven't locked in how I want to achieve that just yet.  What will be important is if I end up with metal, plastic, or resin models because I might have to do some pinning to make sure the models fight tightly to the bases.

     The only concern I could see someone else having (me, I don't give a toss) is that the added modeling material that Secret Weapon Miniatures has used  on top of the standard base raises the height of the infantry model about a quarter of an inch.  Seen here:

The rest of the men will need platform boots to keep up!

     It's not such a huge thing to me, but I'm sure that some neck-beard out there would have an absolute conniption if he thought that this quarter inch would deny his men critical cover in a game.  I don't care at all, whatsoever, and thus I'll just smile and nod.

Summary

     Good quality.  The oval bases are certainly center pieces, the infantry bases aren't so complex that you can't fit a figure on it, and the price seems very reasonable to me.  It's a dollar a base for the infantry bases and $10 for the large ovals.  If you are striving to make your army really stand out from the others around you, this might be a good route to go.  If you're tired of making your own bases, and you'd like to pay someone else to do it for you, Secret Weapons ain't a bad choice at all.

     Final note: if you do get resin bases, always make sure you wash them in warm soapy water to remove any of the mold release agent residue that might still be there.  Paint and mold release do not mix, and bad things will happen.  You will be a sad panda.